1. BACK

1/2″ veneered plywood with UV finish.

2. TOP

1/2″ matching veneered plywood with UV finish for all products.

3. FACE FRAME

3/4” solid wood.

4. DOOR

3/4” solid wood door frames with MDF center panel. Mortise and tenon construction for all doors.

5. SHELF

5/8” veneered plywood adjustable shelf with UV finish and edge banding. Stainless steel shelf clips lock into pre-drilled holes in the bottom of the shelf for support.

6. SIDE PANEL

1/2” matching veneered plywood with UV finish for all products.

7. CONCEALED HINGE

 6 way adjustable.

8. BOTTOM

1/2” matching veneered plywood with UV finish for all products except WRO lines. WRO cabinet sides have a natural UV finish.

1. DOOR

3/4” solid wood door frames with MDF center panel. Mortise and tenon construction for all doors.

2. FACE FRAME

3/4” solid wood face frame.

3. DRAWER FACE

3/4” solid wood drawer frames with MDF center panel. Mortise and tenon construction for all drawer faces. 

4. DRAWER

 5/8” solid wood dovetailed drawer. 

5. SHELF

5/8” full depth veneered shelves adjustable shelf with UV finish and edge banding.  Stainless steel shelf clips lock into pre-drilled holes in the bottom of the shelf for support.

6. BOTTOM

1/2” veneered plywood with UV finish.

7. SIDE PANEL

1/2” matching veneered plywood with UV finish for all products except WRO lines. WRO cabinet sides have a natural UV finish unless a finished end is specified.

8. TOE KICK

1/2” matching veneered plywood toe kick.

9. DRAWER SLIDE OPTIONS

Undermount four-way adjustable full extension soft close slides for all doors.

10. CORNER SUPPORT

Wood corner supports for added stability and structural support.

11. BACK

1/2” veneered plywood with UV finish interior.

12. HINGE

Concealed 6 way soft close.

13. PLYWOOD SUPPORT BEAMS

1/4” structural support beams are utilized for additional stability.